Baking soda and hydrogen peroxide are two natural, non-toxic ways to clean a variety of household surfaces. These two substances can be used either individually or combined to brighten the laundry, remove unpleasant smells, sanitize various areas, and offer a range of other cleaning benefits.
In this article, we will uncover 11 effective ways to clean your home and keep it in pristine condition using baking soda and hydrogen peroxide.
1. Clean Hard Water Residue Off Plastic and Silicone Cooking Tools
If you’re dealing with stubborn marks from hard water on your plastic and silicone cooking tools, there’s a simple solution.
Hard water can leave a chalky white layer on your utensils that regular washing may not remove, but don’t worry! In order to restore their shine,
- Create a paste by combining baking soda and hydrogen peroxide.
- Gently apply this paste onto your utensils, and make sure they’re well-covered.
- Leave it on for around thirty minutes, and then wash your utensils as you normally would.
You’ll be amazed at how clean and fresh your cooking tools will look afterwards.
2. Remove Stains
By combining baking soda and hydrogen peroxide, you can create an amazing stain remover, especially for yellowed white clothes. To use them,
- Create a paste by mixing baking soda and hydrogen peroxide.
- Apply this paste to the stains and let it sit for about thirty minutes.
- Then, wash the clothes as you normally would.
However, be careful when using this method on darker-colored fabrics, as hydrogen peroxide may possibly cause damage.
3. Clean Bathroom Faucets
If you’ve been struggling with hard water stains, hair spray, and soap scum making your fixtures look dull, worry no more because they will shine again after undergoing the baking soda and hydrogen peroxide treatment. Here’s what you need to do:
- Create a paste by mixing baking soda and hydrogen peroxide together.
- Spread this wonder paste all over your faucets and let it sit for a few minutes, so it can work its magic.
- After a short while, using a soft rag, wipe away all the grime and stains effortlessly.
- Once you’ve wiped everything clean, give your faucets a final rinse with a clean, damp cloth to remove any leftover residue.
- Then, grab another cloth and buff those faucets to achieve a flawless, polished shine.
4. Clean Bathroom Drains with Baking Soda
Keep your bathroom drains smelling fresh and flowing smoothly with the help of baking soda. Once a week, clean the sink, tub, and shower drains with baking soda.
Before you get started, make sure to run hot water through the drains to get them ready for the cleaning process.
- Pour in ½ cup of baking soda.
- Let the baking soda sit for 15 minutes so it can get rid of any nasty odors and clear out all the buildup.
- Rinse with hot water to wash away musty smells and debris.
5. Mix Baking Soda with Hydrogen Peroxide
Make your very own kitchen cleanser using baking soda. Take a small glass bowl and combine ¼ cup of baking soda with hydrogen peroxide until you create a paste.
This homemade cleaner is incredibly versatile and can be used to polish both large and small kitchen appliances, remove water stains from utensils, and get rid of stubborn grease buildup on baking pans.
Moreover, this baking soda paste is highly effective for cleaning tile grout, which makes it a handy all-purpose solution for keeping your kitchen spotless, making it shine.
6. Make a DIY Grout Cleaner
Get your grout looking clean and bright by mixing up the baking soda and hydrogen peroxide.
- Combine 1/2 cup of baking soda, 1/4 cup of hydrogen peroxide, and 1 teaspoon of dishwashing liquid.
- Take a sponge and spread the paste to the grout.
- Let it sit for at least 10 minutes.
- Take a grout brush and start scrubbing those grout lines.
- Once you’ve thoroughly scrubbed the grout, use a damp sponge or a soft cloth to wipe away the cleaning paste.
- Rinse the area well to remove any leftover residue.
7. Use Hydrogen Peroxide to Sanitize Beauty Tools
Whenever you use tweezers, manicure or pedicure tools, or eyelash curlers, they can pick up dirt and bacteria from your body. In order to keep them clean and germ-free:
- Get a small bowl and pour some hydrogen peroxide into it.
- Put the tools in the bowl and let them soak for 15-20 seconds.
- Take them out and rinse them with warm water.
- Dry them off using a microfiber towel.
You can also use a cotton ball soaked in hydrogen peroxide to wipe down combs and hairbrushes, ensuring they stay nice and clean too.
8. Degrease Baking Sheets
To easily clean your baking sheets and get rid of tough grease and stubborn grime, try this simple baking soda and hydrogen peroxide mixture:
- Sprinkle a layer of baking soda all over the baking sheet and make sure to cover the entire surface, including the edges. The baking soda should be about 1/8-inch thick.
- Use a spray bottle to dampen the baking soda with hydrogen peroxide. Spray enough so that the baking soda becomes damp but not too wet.
- Let the baking soda and hydrogen peroxide mixture sit on the baking sheet overnight or for at least 8 hours so it can loosen the sticky mess.
- Use a plastic scraper or spatula to lift off the sticky residue easily.
- If there are still some stubborn particles left, use the rough side of a sponge to scrub them away.
- Finally, wash the baking sheet in hot, soapy water to remove any remaining residue.
- Rinse it thoroughly and let it dry.
9. Easily Clean an Oven with Baking Soda
Baking soda is oneway to clean and remove stubborn grime and baked-on food particles from your oven.
- Apply a mixture of baking soda and water onto the interior surfaces of your oven. Make sure to cover the sides and bottom of the oven thoroughly.
- Allow the baking soda paste to sit for at least 12 hours.
- Proceed to spray the paste with vinegar, causing a satisfying foaming reaction.
- Allow this foam to work its magic, and you can reapply the vinegar spray as necessary to dissolve grease.
- Use a fresh damp cloth to wipe away the foamy mixture of baking soda and vinegar from the oven’s interior.
Meanwhile, you can clean the oven racks separately by submerging them in hot, soapy water and scrubbing away any grime before rinsing and drying them.
Remember to wear gloves during the cleaning process to protect your hands and ventilate your kitchen properly while using vinegar so as to avoid any strong odors.
10. Laundry Stain Remover for White Clothes
Hydrogen peroxide is a mild bleaching agent that is ideal for removing discoloration from white and light-colored fabrics.
When you mix it with dishwashing liquid that contains a degreasing agent, it forms an effective stain removal solution for laundry.
To make the stain remover,
- Use a dark-colored glass or opaque plastic spray bottle to keep the hydrogen peroxide stable.
- Use a funnel to add 1 cup of hydrogen peroxide (that’s 2 parts) and 1/2 cup of dishwashing liquid (that’s 1 part) into the spray bottle.
- Close the bottle tightly and give it a good shake to mix everything up.
- Don’t forget to put a label on the bottle with instructions on how to use the stain remover.
When you have a stain on your clothes, simply spray the stain remover directly onto the stained area. You can use a soft-bristled brush or your fingers to gently work the solution into the fabric. Let it sit for about 5 to 10 minutes, and then wash the garment as you usually would. The stain should come out easily with this homemade stain remover.
11. Remove Mold Stains from Walls
While chlorine bleach is the most effective mold killer, you can still use hydrogen peroxide to get rid of mold and lighten stains. Keep in mind that hydrogen peroxide may work a bit slower, and you might need to apply it multiple times.
It’s important to prioritize safety during mold removal, so make sure to wear protective eyewear and a mask and allow fresh air to move around the room while you’re cleaning.
In order to effectively use undiluted hydrogen peroxide for removing mold, you have two options: either apply it using a spray bottle or a sponge.
- To start, target the bottom of the mold growing and gradually work your way up the wall. This technique helps minimize the risk of mold spores spreading and prevents streaks from forming on the wall.
- While you are applying the hydrogen peroxide, make sure that the wall’s surface is completely wet but not excessively saturated because oversaturation may cause damage to the drywall, so it’s crucial to strike the right balance.
- Once the hydrogen peroxide has been applied, carefully wipe away the visible mold. However, there’s no need to rinse the wall afterwards.
- After completing the cleaning process, allow the treated surface to air-dry completely. This step is crucial to guarantee the complete effectiveness of the treatment.
And if necessary, you can repeat the application to tackle stubborn mold infestations. By following these steps, you can safely and effectively remove mold from your walls using hydrogen peroxide.
